Description
Commercial Grade – full electric lock release
24v Control
- Column Steel Thickness: 5mm
- Carriage Steel Thickness: 6mm
- Carriage Yoke Thickness: 14mm
- Arm Steel Thickness: 6mm
- Base Plate Steel Thickness: 16mm
- Combo (Symmetrical and Asymmetrical) Arm Assembly
- Straight Front/Rear 3 Stage reach from 550 to 1250mm
- Straight Rear 2 Stage reach from 780 to 1350mm
- Screw-in pads 4 pieces included
- Truck adapters 4 pieces included
- Single Side safety lock release
- Automatic arm lock restraints
- Relief valve built in power pump to prevent overloading
- Door guards protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 10mm diameter cable and 125mm pulley that reduce high stress on synchronisation process and increase cable life
- Upgraded Floor Plate, Beveled Diamond Plate Steel 4mm with Supporting Bracket.
- Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
- Lifting operation by pressing “UP” button on motor
- Manual lowering operation by pressing lever
- Relief valve built in power pump to prevent overloading
- Overall Height: 2886mm
- Overall Width: 3410
- Maximum Lift height with Truck Adapters: 2060mm
- Maximum Lift height without Truck Adapters: 1900mm
- Minimum Height of Arm Top: 95mm
- Carriage to Carriage Width (Drive through clearance): 2540
- Column to Column Width: 2770
- Column Cross Section: 280 x 180
- Floor Plate Cross Section: 480 x 350mm
- Driving Mode: Dual hydraulic cylinders, chain drive
- Motor: 240v Single Phase 3HP 10A (recommend a 30A breaker)
- Hydraulic Oil: 10-12L gallons AW32/AW46
- Lifting Capacity: 4500kg / 10,000 LB
- Time to full rise: 50 sec
- Concrete Requirement: 150mm thick at 3500 psi reinforced with fiberglass or steel (100mm thick for vehicles 2000kg and below)
- Anchor bolts/mounting hardware included
- Tool trays and toe guards included
- Shipping Weight: 700kg
- Shipping package size: 2880×470×740mm